Re: Whole-home & wired internet
The approved DTV method is to run a coax to the router from the SWM splitter and use a DECA BB and the power supply for wired internet connection but you can use an Ethernet cable to the Genie. The...
View ArticleRe: Whole-home & wired internet
If I connect the HR44-500 directly to the router via ethernet, do I still need the DECA or do I disconnect that? And if I disconnect that, do I leave the other DECA connected to the HR21-200? And even...
View ArticleRe: Whole-home & wired internet
You don't need the DECA Home adapter on the Genie but leave it on the others. No DECA nedded for wireless either
View ArticleClik here to view.
Re: cant reprogram my rc71 for new tv
Remember that the Genie Remote must be in RF mode to program to the TV. Please follow these steps:1. On the remote, press and hold the MUTE and ENTER simultaneously while pointing the remote to your...
View ArticleRe: Activate a Genie with low signal??
thx so much for the replies everyone!just did a sig test.. all sat locations are in the green, as i mentioned a FEW transponders on ONE satt...will JUST that prevent activation?? Date: Wed, 15 Oct 2014...
View ArticleRe: Activate a Genie with low signal??
Please post back with your signal readings for each satellite's transponders (and both tuners if applicable). You'll find these readings under "Menu" -> "Setup" -> "System Setup" -> Satellite...
View ArticleRe: Activate a Genie with low signal??
WOW!! that's a lot of info..:) i may reply back with a picture of the screens...just curious... are there some xponders more critical than others?? from what i saw, most were 80-90 or above... Date:...
View ArticleRe: Activate a Genie with low signal??
What test did you do? The "real' test is to do a "repeat satellite' process. This process does the same test as if it was being activated. If this passes then you are good
View ArticleRe: Directv Swm adapter crippling my internet speed,
that is not how it should be connected. There should be nothing but a coax cable (power and HDMI) connected to the HR24
View ArticleRe: Directv Swm adapter crippling my internet speed,
Correct, I was responding to what is connected to the DECA... A cable and a lab wire... The only thing connected to the HR24 is what you stated
View ArticleRe: Activate a Genie with low signal??
ohh ok.. i just checked the signal on each location as the tech did a few weeks ago...i'll do the repeat satellite process later today... doing so will not affect my service if it does not pass will...
View ArticleClik here to view.
Re: Activate a Genie with low signal??
There check marks in all except a red x in 103 even Is that acceptable?? Don
View ArticleSWIM lnb setup at camp
Hello, I have a slimline dish with a swm LNB with one coaxial feed. I want to take this dish and my receiver HR21-200 to our camp for the wknd. Do I need a power inserter or a BBC to get a signal. I'm...
View ArticleRe: Is there REALLY no version of directv2pc for MAC users?
The TV shows that you download have expiration dates that may render them unusable.
View ArticleRe: SWIM lnb setup at camp
Thanks peds48. So I connect my coax to the lnb then connect it to the power inserter then the receiver?
View ArticleRe: SWIM lnb setup at camp
Yes. LNB to PWR to SWM on PI then SIGNAL to IRD from PI to DVR
View Article