Re: Need to know my options for another receiver
the legacy TiVOS HR10-250 also work with DirecTV although is only SD
View ArticleRe: Tips for using GenieGo on S4?
no way to move the app, but you can specify to store the content on the SD card
View ArticleRe: Can't get video on-demand at U-Verse
have you done a speed check lately? you can try www.speedtest.net and post back with the results
View ArticleRe: Unable to access internet via C41-700 Mini's
First thing to try is resetting your Genie/clients using the red button behind the front panel access card door. See if that helps. ( on side panel on clients receivers).
View ArticleRe: Not Connected(22)
As I said, you can't use an AP (access point) to try to connect. you need to take the AP and "convert" it to and ethernet bridge.
View ArticleRe: YouTube and Pandora apps on Genie?
yup, it can take up to 48 ours for these features to show on the Genie, assuming you are connencted to the internet
View ArticleRe: HR34-700 IR Receiving Eyes
The IR sensor is right next to the power button (DirecTV logo)
View ArticleHow to fix error code 775 when in MDU and no SWiM ODU is currently connected?
Technician installed services last Tuesday and by Friday I was receiving the 775 error. I showed him the SWiM ODU I brought with me from my house and he said I no longer needed it since I'm in an MDU....
View ArticleGenie upgrade question
I like upgrade Genie Dvr but I Perfer ,h25 per receiver's cost from direct tv,or local satellite tv store what place cheapest, I need up to 2 h25 receiver's maximum I what keep Hr24 dvr. I have...
View ArticleRe: Searching for New Software (079B) HR-20
Since the other boxes are working fine and this is an HD DVR then this could be a signal issue, lets do a little test can you go to the back of the unit and swap the two cables connected to sat in 1...
View ArticleRe: Searching for New Software (079B) HR-20
Did you just connect this DVR? I'm trying to understand what caused the DVR to begin seeking software unless it's been disconnected for a time. The software that should be on it is inactive and not...
View ArticleRe: Selecting Tuners in Genie HR34
If you intend watching the same channel on the Genie plus any number of Mini Clients, the trick is to put the Genie to recording the channel then set the Mini's to watching the recording, that way only...
View Articleprotected program TV Y7
Just got the Genie and the Genie Mini in our son's room. Our son's television shows a black screen with PROTECTED PROGRAM TV Y7 at the top of the screen. How do we get this to unlock..?
View ArticleRe: Media Share / TVVersity / New PC Help
I believe TVersity (v 1.7.4.1) will indeed work on a Windows 8 computer. To connect a new computer, simply get the PC networked, fire up TVersity (specify where the files are located) temporarily...
View ArticleRe: protected program TV Y7
Is this message apparent on all channels or just some? Tune the Mini Client to channel 239 and see if it comes in. If not, then the Mini has not been properly set up. If the message only appears on...
View ArticleRe: Trying to add external drive to HR21-100, receiving Diagnostic Error...
You can go back and forth between drives, but you'll find that switching back and forth between drives to be totally impractical. You'd go crazy trying to engineer which series recordings were on...
View ArticleRe: You Tube
I would do a red button (inside card door) reset of the Genie, and while it's booting up go to the Mini Client and do a red button (on right side of box) reset there as well.
View ArticleProtected Program on Genie Mini
We are having trouble with the PROTECTED PROGRAM on our Genie Mini. Please forgive asking this question again, but I cannot reply in the forums for whatever reason..... Channel 239 does not have the...
View ArticleRe: Searching for New Software (079B) HR-20
It has been my DVR for years and has the 0x740 software version.Mon night/ Tue morning it crashed. I unplugged it and it set up fine. It only worked a few hours then last night/this morning and it...
View Article